Table of Contents
Advertisement
USB cap / tension jack
The replacement of the USB sealing cap and tension jacks will not be described since it is
simple and self-explanatory.
Film labels
The procedure for replacement is as described in Chapter "Softkey labeling".
Operator panel front
When replacing the operator panel front, the previous display and keyboard controller can
continue to be used. They are therefore disassembled and reassembled after the appropriate
component has been replaced.
Note
We recommend reusing the keypad controller to prevent any loss of the control parameters
that have been programmed in.
Operator panel front: OP 010
Manual, 07/2018, A5E36371538B
Spare parts
7.2 Replacement
107
Advertisement
Table of Contents
