Introduction; Before Using The Product For The First Time - Martin ELP WW LED Profile User Manual

Introduction

The ELP WW from Martin® is an ellipsoidal/profile lighting fixture with a 260W warm white LED
engine that produces a sharp gobo projection with a flat field
The fixture provides a class leading CRI of 97 at a color temperature of 3000K with an output of
7000 lumens and has 16 bit dimming with 4 selectable curves. It includes innovative features
including a gear-based fine focus system which is still compatible with industry standard
accessories. The fixture is ideal for theatre, gobo projection, art lighting, architectural lighting and
key lighting applications.
The Martin® ELP WW can be controlled using any DMX-compliant controller and may be remotely
configured by RDM. It is supplied with this user manual, a 1.5 m (4.9 ft.) power cable ready for a
local power plug (not included) and yoke for attachment of suitable, user supplied rigging clamps.

Before using the product for the first time

1. Read 'Safety information' on page 5 before installing, operating or servicing the fixture.
2. Unpack and ensure that there is no transportation damage before using the fixture. Do not
attempt to operate a damaged fixture.
3. Before operating, ensure that the voltage and frequency of the power supply match the power
requirements of the fixture.
4. If the fixture is not going to be hard-wired to a mains supply, install a local power plug (not
supplied) on the end of the supplied power cable.
5. If fixtures are exposed to a sudden temperature change, give them time to warm or cool to the
ambient temperature before applying power. This will help avoid damage due to condensation.
6. Check the support pages on the Martin® website at www.martin.com for the most recent user
documentation and technical information about the fixture. Martin® user manual revisions are
identified by the revision letter at the bottom of the inside cover.
8 Martin ELP WW Profile user guide