Control Menus - Martin ELP WW LED Profile User Manual

Control menus

To access the control menus, press the MENU button. Use the UP and DOWN buttons to navigate
the menus. Select any required menu option using the ENTER button. For more information, see
Using the control menus on page 16.
Default fixture settings are shown in bold.
Top Menu Menu level 2
DMX Setup DMX Addr
DMX Mode
Stand-Alone
Personality
Dim Curve
PWM Freq
No Data
Cool Mode
26
Menu level 3 Menu level 4
1 - XXX
1/2/4 ch
Master
Slave
Linear
Square
Inv Sq
S-Curve
600-1200Hz
Blackout
Hold
Reg fan
Full
Low
Martin ELP WW Profile user guide
Notes
DMX address (default
address = 1). The
DMX address range is
limited so that the
fixture will always have
enough DMX
channels within the 512
available.
DMX control mode
Fixture acts as master in
master/slave operation -
DMX/RDM signal will
override master/slave
operation
Fixture copies master in
master/slave operation -
DMX/RDM signal will
override master/slave
operation
Optically linear dimming
curve
Square law dimming curve
Inverse square law
dimming curve
S-curve (fixture emulates
incandescent
lamp voltage linear RMS
dimming curve)
If data connection is lost,
fixture will blackout
If data connection is lost,
fixture holds latest received
data value at all channels
Fan optimized for light
intensity (temperature
controlled by regulating
fan speed, light output
unaffected)
Fans set to full/low,
constant speed, fixture
temperature