Safety Information - Martin ELP WW LED Profile User Manual

Safety information

Read the safety precautions in this manual before installing, operating or
The following symbols are used to identify important safety information on the product and in this
manual:
Warning! Warning!
Safety Powerful
hazard. Risk light
of severe emission.
injury or Risk of eye
death. injury.
Warning! Risk Group 1 product according to EN 62471 and IEC/TR 62778. Do not
look directly into the beam. Do not view the light output with optical instruments or
any device that may concentrate the beam.
This lighting fixture is for professional use only and must be installed by a qualified
technician. It is not for household use. It presents risks of severe injury or death due
to fire hazards, electric shock and falls. It can create a fire hazard or a risk of eye
injury if the safety precautions below are not followed.
Install, operate and service Martin® products only as directed in their user manuals,
or you may create a safety hazard or cause damage that is not covered by product
warranties. Follow the safety precautions listed below and observe all warnings in
this manual and printed on the product. Keep this user manual for future use.
For the latest user documentation and other information about this and all Martin®
products, please visit the Martin® website at http://www.martin.com
If you have any questions about how to install, operate or service the fixture safely,
please contact your Martin® distributor (see www.martin.com/distributors for details)
or in the USA on 1-844-776-4899.
Respect all locally applicable laws, codes and regulations when installing, operating
or servicing the fixture.
Protection from electric shock
Ensure that the fixture is electrically connected to ground (earth).
Disconnect the fixture from AC power when not in use.
Do not open the fixture or remove any cover. Refer any service operation not
described in this manual to an authorized Martin Service partner.
Shut down power to the entire installation at the main power distribution board and
lock out power before carrying out any installation or maintenance work.
Use only a source of AC power that complies with local building and electrical codes
and has both overload and ground-fault (earth-fault) protection.
WARNING!
servicing this product.
Warning! Warning!
See user Hazardous
manual for voltage. Risk
important of lethal or
severe
safety
information. electric
shock.
Martin ELP WW Profile user guide
Warning! Warning!
Fire hazard. Hot surfaces.
5