Securing With A Safety Cable; Changing The Lens Tube - Martin ELP WW LED Profile User Manual

Securing with a safety cable

Secure the fixture with a safety cable (or other secondary attachment) that is approved for the
weight of the fixture so that the safety cable will hold the fixture if the primary attachment fails.
Loop the safety cable through the attachment eye at the rear of the fixture (see illustration above)
and around a secure anchoring point.
If a safety cable attachment point becomes damaged or deformed, do not use the fixture. Return it
to a Martin Service Centre for repair.

Changing the lens tube

Four different lens tubes with varying beam angles are available for the fixture. To change the lens
tube, refer to the diagram on the next page:
Martin ELP WW Profile user guide 11