Fixture Overview - Martin ELP WW LED Profile User Manual

Fixture overview

1 – Filter frame retaining clip
2 – Filter frame
3 – Interchangeable optical lens tube
4 – Aluminium lens tube housing
5 – Fine Focus adjustment knob
6 – Shutter knobs for beam shaping
7 – Gobo / accessory gate with sliding cover
8 – Mounting bracket / yoke
9 – Tilt locking knob for the mounting bracket
10 – Heat sink opening
11 – Safety eye to attach safety bond
12 – Rear handles for positioning
13 – Control panel. The display flashes
14 – DMX input (5 pin XLR plug)
15 – DMX output (5 pin XLR socket)
16 – Mains fuse
17 – Mains power input
18 – Mains power output
Martin ELP WW Profile user guide
when DMX is not present
A Neutrik PowerCON TRUE1 input
connector is provided to connect the
fixture to mains power.
A Neutrik PowerCON TRUE1 output
connector can be used to supply power
to other fixtures. Please ensure you keep
within the power limits listed in "Linking
fixtures to power in a chain" on page 13.
9