Safety Information - Martin LC 2140 User Manual

Safety Information

Read the safety precautions in this section before
installing, powering, operating or servicing this
The following symbols are used to identify important safety information on the product and in this manual:
DANGER!
Safety hazard.
Risk of severe
injury or death.
This product is for professional use only. It is not for household use.
This product presents risks of severe injury or death due to fire hazards, electric shock and falls.
Read this manual before installing, powering or servicing this product, follow the safety precautions listed
below and observe all warnings in this manual and printed on the product. If you have questions about how
to operate the product safely, please contact your Martin supplier or call the Martin 24-hour service hotline
at +45 70 200 201.
P R O T E C T I O N F R O M E L E C T R I C S H O C K
• Shut down power to the entire installation at the building's main power distribution board and lock out
power (by removing the fuse for example) before carrying out any installation or maintenance work.
• Disconnect the product from AC power before removing or installing any cover or part and when not in
use.
• Always ground (earth) the product electrically.
• Use only a source of AC power that complies with local building and electrical codes and has both
overload and ground-fault (earth-fault) protection.
• The outlet used to supply the product with power must be installed near the product and easily accessible
so that the product can easily be disconnected from power.
• Connect this product to AC power using only a power cable that is listed, minimum 12 AWG or
3 x 2.5 mm
• Connect this product to AC power using only listed power connectors rated 20 A minimum.
• The total current draw of all devices connected in a chain via one product's power input socket, including
that product, must not exceed 20 amps.
• Before using the product, check that all power distribution equipment and cables are in perfect condition
and rated for the current requirements of all connected devices.
• Do not use the product if the power cable or power plugs are in any way damaged, defective or wet, or if
they show signs of overheating.
• Do not expose the product to rain or moisture.
• Refer any service operation not described in this manual to a qualified technician.
Warning!
Refer to
manual before
installing,
powering or
servicing.
2
, SJT or better. Suitable cable jacket types include ST, SJT, STW, SEO, SEOW and STO.
WARNING!
product.
Warning! Warning!
Hazardous Fire hazard.
voltage. Risk of
lethal or severe
electric shock.
Warning!
Emission
hazardous to
eyesight.