Table 10: At-X530-52Gpxm Twisted Pair Ports 1 - 48 Led Functions - Allied Telesis AlliedWare Plus x530 Series Installation Manual

Table 10. AT-x530-52GPXm Twisted Pair Ports 1 - 48 LED Functions
LED Ports
Solid Green
1 - 40
Flashing
Green
Solid Green
L/A
41 - 48
Flashing
Green
Solid Amber
Flashing
1 - 48
Amber
Off
Solid Green
Solid Amber
Flashing
Amber
PoE 1 - 48
Off
State
The port has established a 1 Gbps link to a network
device.
The port is transmitting or receiving data at 1 Gbps.
The port has established a 1/2.5/5 Gbps link to a
network device.
The port is transmitting or receiving data at
1/2.5/5 Gbps.
The port has established a 10 Mbps or 100 Mbps
link to a network device.
The port is transmitting or receiving data at 10 Mbps
or 100 Mbps.
Possible causes of this state are:
- The port has not established a link with another
network device.
- The LEDs are turned off. To turn on the LEDs, use
the eco-friendly button.
PD On - The switch is delivering power to a
powered device connected to the port.
PD Error - The switch has shut down PoE on the
port because of a fault condition.
PD Max Current - The switch has detected a
powered device on the port but is not delivering
power to it because doing so would exceed its
available power budget.
No PD - This LED state can result from the following
conditions:
- The port is not connected to a powered device or
the device is powered off.
- The port is disabled in the management software.
- PoE is disabled on the port.
- The LEDs are turned off. To turn on the LEDs, use
the eco-friendly button.
x530 Series Installation Guide for Stand-alone Switches
Description
33