Factory Default Nat/Route Mode Network Configuration; Factory Default Transparent Mode Network Configuration - Fortinet FortiGate FortiGate-4000 Installation Manual

Factory default configuration

Factory default NAT/Route mode network configuration

Factory default Transparent mode network configuration

38
The factory default content profiles can be used to apply different levels of antivirus
protection, web content filtering, and email filtering to the network traffic that is
controlled by firewall policies.
• Factory default NAT/Route mode network configuration
• Factory default Transparent mode network configuration
• Factory default firewall configuration
• Factory default protection profiles
When the FortiGate-4000 unit is first powered on, it is running in NAT/Route mode
and has the basic network configuration listed in
you to connect to the FortiGate-4000 unit web-based manager and establish the
configuration required to connect the FortiGate-4000 unit to the network. In
HTTPS management access means you can connect to the web-based manager
using this interface. Ping management access means this interface responds to ping
requests.
Table 12: Factory default NAT/Route mode network configuration
Administrator
account
Internal interface
External interface
Out of band
management
interface
If you switch the FortiGate-4000 unit to Transparent mode, it has the default network
configuration listed in Table
Table 13: Factory default Transparent mode network configuration
Administrator
account
01-28004-0028-20040830
User name:
Password:
IP:
Netmask:
Management Access:
IP:
Netmask:
Default Gateway:
Manual:
Primary DNS Server:
Secondary DNS Server:
Management Access:
IP:
Netmask:
Default Gateway:
Management Access:
13.
User name:
Password:
Table 12. This configuration allows
admin
(none)
192.168.1.99
255.255.255.0
HTTPS, Ping
192.168.100.99
255.255.255.0
192.168.100.1
207.194.200.1
207.194.200.129
Ping
172.16.1.2
255.255.255.0
172.16.1.1
HTTPS, Ping
admin
(none)
Getting started
Table 12,
Fortinet Inc.