Factory Default Nat/Route Mode Network Configuration - Fortinet FortiGate 500A Installation Manual

Getting started

Factory default NAT/Route mode network configuration

FortiGate-500A Installation Guide
When the FortiGate unit is first powered on, it is running in NAT/Route mode and has
the basic network configuration listed in
connect to the FortiGate unit web-based manager and establish the configuration
required to connect the FortiGate unit to the network. In
administrative access means you can connect to the web-based manager using
HTTPS protocol through this interface. Ping administrative access means this
interface responds to ping requests.
Table 2: Factory default NAT/Route mode network configuration
Administrator
account
LAN
Port 1
Port 2
Port 3
Port 4
Port 5
Port 6
Network Settings
01-28005-0101-20041015
Factory default NAT/Route mode network configuration
Table
User name:
Password:
IP:
Netmask:
Administrative Access:
IP:
Netmask:
Administrative Access:
IP:
Netmask:
Administrative Access:
IP:
Netmask:
Administrative Access:
IP:
Netmask:
Administrative Access:
IP:
Netmask:
Administrative Access:
IP:
Netmask:
Administrative Access:
Default Gateway (for default route)
Interface connected to external network
(for default route)
Default Route
A default route consists of a default gateway and the name of
the interface connected to the external network (usually the
Internet). The default gateway directs all non-local traffic to this
interface and to the external network.
Primary DNS Server
Secondary DNS Server
2. This configuration allows you to
Table 2, HTTPS
admin
(none)
0.0.0.0
0.0.0.0
Ping
192.168.1.99
255.255.255.0
HTTPS, Ping
192.168.100.99
255.255.255.0
Ping
0.0.0.0
0.0.0.0
Ping
10.10.10.1
0.0.0.0
HTTPS, Ping
0.0.0.0
0.0.0.0
Ping
0.0.0.0
0.0.0.0
Ping
192.168.100.1
port2
207.192.200.1
207.192.200.129
17