Turning Fortigate-4000 Chassis Power On And Off; Turning On Fortigate-4000 Chassis Power - Fortinet FortiGate FortiGate-4000 Installation Manual

Turning FortiGate-4000 chassis power on and off

Turning FortiGate-4000 chassis power on and off

Turning on FortiGate-4000 chassis power

30
Use the following procedures when turning on and off power to the FortiGate-4000
chassis. Turn power on and power off in the order specified in the following
procedures to avoid damaging FortiGate-4000 chassis components.
• Turning on FortiGate-4000 chassis power
• Turning off FortiGate-4000 chassis power
Turning on the FortiGate-4000 chassis power consists of making power connections,
turning on power supplies, and then turning on individual components.
1 Make sure all FortiGate-4000 chassis power switches are turned off.
Check the following:
• Power switch on each power supply module
• Chassis power switch on the power connector module
• On/off switch on the management module
• On/off switch on the switched interface module (FortiGate-4000S)
2 Connect the three power cables to the power connection module on the
FortiGate-4000 chassis back panel.
3 Connect the power cables to power outlets.
Connect each power cable to a different power source, if possible. If one power
source fails, the other source might still be operative.
4 Turn on the power switch on each power supply module.
5 Turn on the chassis power switch to supply power to the power supplies.
The Power LED on each power supply module lights.
6 Turn on the management module power switch.
7 Turn on the switched interface module power switch for each switched interface
module (FortiGate-4000S).
8 Press the power button on each FortiBlade-4010 module.
The PWR LED on each FortiBlade-4010 module lights.
01-28004-0028-20040830
Getting started
Fortinet Inc.