Placement - Datavideo TVS-1200A Instruction Manual

5.4.2 Placement

Phase is defined as the virtual camera position in a virtual studio. Each virtual scene (M/E1 –
M/E4) can be assigned three phases (phase 1 – 3). Click on any of the three phase windows to
configure the image phase settings. The current phase is highlighted with an orange bar above
the preview window as shown in the diagram below.
Placement function allows the user to customize the phases, i.e. change the camera position
manually. Possible virtual camera movements are Pan, Tilt and Zoom. To set the phase, click
on the "Placement" button to open the "Placement Configuration Window" as shown in the
diagram below, which allows the user to select desired PAN, TILT and ZOOM values.
Locate the control panel on the right of the
"Placement Configuration Window." X and Y are the
adjustable coordinates. The user can use the joystick
to configure the PAN and TILT settings. The zoom slide
bar on the right adjusts the zoom in/out values
accordingly. The user can also use the mouse scroll
wheel to adjust the zoom in/out values.
An additional button, Defaults, enables restoration of
the default settings.
The preview window is on the left of the"Placement
Configuration Window," allowing the user to preview
41