Import; Placement - Datavideo TVS-1000A Instruction Manual

Trackless virtual studio system

Table of Contents

5.4.1 Import

The user may import virtual set background from the hard disk drive (HDD). Click on the Import

button to open a window that displays a list of directories containing virtual set backgrounds.

Preview of the virtual set background is available on the right of the directories listing window.

Choose the desired dvsx file to the selected M/E bin. Click on M/E1-4 to view loaded virtual

studios on Preview window of the Multi-View Area.

File Location: D:\TVS-1000A\Sets

Phase is defined as the virtual camera position in a virtual studio. Each virtual scene (M/E1 –

M/E4) can be assigned three phases (phase 1 – 3). Click on any of the three phase windows to

configure the image phase settings. The current phase is highlighted with an orange bar above

the preview window as shown in the diagram below.

Placement function allows the user to customize the phases, i.e. change the camera position

manually. Possible virtual camera movements are Pan, Tilt and Zoom. To set the phase, click on

the "Placement" button to open the "Placement Configuration Window" as shown in the

diagram below, which allows the user to select desired PAN, TILT and ZOOM values.

Table of Contents