Table of Contents
Advertisement
11
Why can't I adjust the size and
position
for
Virtualset maker?
12
I cannot hear audio output from the
TVS-1200A PGM OUT while the
output is set to 1080P 50/60,
however, I can see the video.
13
The order of the three monitors is
not the order that I want.
14
What codec should I use if I want to
create a downstream key that has an
animation
effect
Channel?
15
It is difficult to move Source Media
to the location that I want in
Virtualset Maker?
16
Why is there no sound from Aux card
(Green card) HDMI output?
17
Why is there no video out while
feeding the Aux card (Green Card)
HDMI output with 1080P 50 / 59.964
/ 60 inputs?
18
Why is there only 2 audio channel
output when I use an 8 audio
channel input?
19
How to monitor the PGM audio?
20
What are the other compatible NLE
versions?
specific
layer
in
with
Alpha
73
Please make sure you are not adjusting the
Studio Layer, which is a background layer
not meant to be adjustable. However, you
can adjust the Static Layer. Please click the
"add" button and then select the Static
layer by clicking on the picture you wish to
re-size or re-position.
If your output is set to 1080P 50/60, please
make sure the SDI 3G output mapping
(Configuration / Configuration / General) is
correctly selected (Type A or Type B).
Please adjust the monitor order in the TVS
Monitor
configuration
(Configuration / Configuration / screens /
monitor configuration)
Please use Lagarith Lossless to make .avi
file, or DNxHD to make .mov file. Please
make sure to select RGBA format which
includes Alpha Channel.
In Points Mode, you can pull the four
corners to move the Source Media to the
location that you desire.
Aux Card for PVW output does not include
audio. The PGM output supports Audio
embedded.
Aux Card does not support 1080P 50 /
59.964 / 60 format. Please use lower
resolution format.
TVS supports 2 audio channels only.
The user can use a TV or a monitor with
earphone
connector or speaker and
connect it to PGM OUT.
The following NLE SW supports H.264
coding
1. Premiere Pro CC 2014 and later
2. Final Cut Pro X and above
3. EDIUS Pro 7 and above
In addition Premiere Pro CC 2015 and later
are the NLE SW that supports MPEG-II
encoding (INTEL HD4600).
settings.
Advertisement
Table of Contents
