Table of Contents
Advertisement
Introduction
The Datavideo HS-1000 mobile video studio is a ready to go solution; it will save a lot of your valuable time
when setting up or breaking down in the field. To get the most out of this product please read this user
manual in full, and the other associated user manuals supplied within the Manual Binder to familiarise
yourself with all the products within the HS-1000.
Installation
Transportation & Placement
The HS-1000 is heavy – approximately 54Kg – Do not attempt to lift or move it on your own.
A minimum of 2 people are required to lift or move this product. There are two carry handles on either side of
the product, please use these handles to safely share the weight between the people lifting the HS-1000.
Always use a trolley to safely transport the HS-1000 over distances of 2 Metres or more. The HS-1000
should be always lifted and placed in an upright position; do not place or try to move the unit in any other
way as damage or injury could result.
Place the HS-1000 on a strong, stable, flat surface that is capable of supporting the weight.
Do not use a folding or single leg table to support the HS-1000.
Opening the case
On each side of the HS-1000 case there are wing nut clasps securing the front and rear covers.
Undo each clasp by folding the wing nut out and then rotating it. The clasp can then swing free of the catch.
HS-1000 with front cover removed and monitor rack lowered
6
Advertisement
Table of Contents
