Table of Contents
Advertisement
In Rectangle Mode, the user is only allowed to adjust the size of the
rectangle without changing the shape.
Reset
Clicking on "Reset Transformation" will restore the selected layer to its
Transformation
default shape and size.
Next, import a logo (static layer) from the disk and place it above the studio layer.
VIRTUALSET maker gives the user the capability to manipulate the layer orientation. Once the
logo is imported, you will see that the controllers in pane 3 are enabled. The example below
illustrates how you can zoom, rotate and position a "datavideo" logo using the five controllers
outlined as follows. The goal is to pave the studio layer with the datavideo logo.
Position Knob
Zoom Slide
X Knob
Bar
28
Y Knob
Z Knob
Advertisement
Table of Contents
