Auto Play - Datavideo TVS-1200A Instruction Manual

the changes. Click the "Close" button to shut down the "Placement Configuration Window"
after you have configured the desired placement settings.

5.4.3 Auto Play

Auto Play generates the animated PTZ transition effect. If the AutoPlay function is switched on,
the camera movement is smooth, animated. The transition time is adjusted by controls
located on the right of the phase previews (Time, Frame). If the Auto Play button is turned off,
the camera position is switched 'sharply' (cut effect without animation). To make things easier,
three default transition duration times between phases have been defined: F (1 s), M (3 s), S (5
s). For every newly imported studio, default phase settings are defined: the first phase has
zero zoom (0%), the second phase has a 50% zoom, and the third phase has 100% of the
maximum zoom.
The user can customize the transition time by clicking the up-down arrows of the time and
frame settings. Click on the Auto Play button (fonts will turn amber) to activate the desired
animated transition after configuration.
Finally, click on
open a configuration window that allows the user to adjust the size and position of the talent
as well as the view on plasma TV. The settings are remembered by the program until a new
view is loaded. To be remembered, they can be saved in the session file. The configuration
window is shown below.
S: Slow speed (5 seconds by default)
M: Medium speed (3 seconds by default)
F: Fast speed (1 second by default)
located on the right of the rows of Source A, Source B and Source C to
42