Import - Datavideo TVS-1200A Instruction Manual

The virtual studio configuration panel is located in the bottom left-hand corner of the screen.
Three rows of buttons located below the three phase windows serve the purpose of allowing
the user to select talent material source and plasma TV material source. As depicted in the
diagram above, row A is for talent material source selection and row B is for plasma TV
material source selection. Row C is for second talent material source selection and will only be
activated if the two-talent virtualset is used. In the example above, row C is disabled in the
one-talent scenario. The sources can be live show from Camera 1 or 2, Media 1 or 2, Still 1 or
2, or even Black if necessary. The selected source button is illuminated in amber.
Row A and Row C are usually talent images from CAM sources. The keying filter is overlaid on
this source. The keying filter overlay removes the single-colour background on which the
talent is shot (e.g. green). The other signal source, Row B, may be a video or a still image. It is
usually displayed on a virtual screen, which is designed as part of the studio set. However, it all
depends on the studio design. Signals can be used differently in every studio. Because of this,
signals are denoted in a universal way, as A and B, in the studio configuration panel.
After selecting the talent and plasma TV material sources, the next step is to customize your
program. There are three features that give the user the ability to customize their program:
import, placement and auto play. Import allows the user to select their preferred virtual
background. Placement gives the user the flexibility of positioning the selected virtual
background. Auto Play generates the animated PTZ transition effect.

5.4.1 Import

The user may import virtual set background from the hard disk drive (HDD). Click on the
Import button to open a window that displays a list of directories containing virtualset files.
Preview of the selected virtualset is available on the right of the directories listing window.
Choose the desired dvsx file to the selected M/E bin. Click on M/E1-4 tabs to view the
corresponding loaded virtual studios on Preview window of the Multi-View Area.
File Location: D:/TVS-1200A Data/Sets/
40