Table of Contents
Advertisement
2.5
RMC-220 Remote Controller
The RMC-220 is a cost effective remote controller designed specifically for the TVS-1200A
Virtual Studio System. The RMC-220 interfaces with the TVS-1200A Virtual Studio System via
an RS-232 interface. The RMC-220 gives the user switcher-style control of the TVS-1200A
Virtual Studio System. There are several effects that the user can also control on the RMC-220,
such as downstream keyers (DSK), logo insertion, and transition effects. In addition, the T-Bar
gives the user the convenience to perform transitions between Preview (PVW) and Program
(PGM).
The RMC-220 has also been equipped with 10 function keys, which provide the user with the
flexibility of manually assigning functions related to audio features, downstream keyer, delay,
mix effect, media player functions and output effects to the 10 keys.
The features are summarized as follows,
A switcher style keyboard for direct TVS-1200A operation
Clear key definitions
Ten user-defined function keys, F1 to F10 and each of these function keys can be:
Audio
Capture Mute
Capture Volume
Input Mute
Input Solo
Input Volume
Output Mute
Output Volume
Streaming Mute
Streaming Volume
DSK
General
Set Position
Delay
Set Preview
Set Rotation
Set Scale
Set Source
Transition Cut
Transition Fade
12
3. Push the PCB with the 2.5" HDD mounted
back into the HDD enclosure.
4. Tighten the two screws (removed earlier)
of the rear cover of the removable 2.5" HDD
enclosure.
5. Push the removable 2.5" HDD enclosure
into the front slot of the TVS-1200A system
and move the locking lever from right to left.
Mix Effect
Media
Import Studio
Auto Play
Set AutoPlay
Loop Play
Set Bus A Source
Pause
Set Bus B Source
Play
Set Bus C Source
Select
Set Phase
Stop
Set Speed
Output
Select Preview
Select Program
Set T-Bar Position
Transition Cross-Dissolve
Transition Fade to Black
Advertisement
Table of Contents
