Table of Contents
Advertisement
Chapter 11
The user is allowed to control the TVS-1000A with external keyboards such as an RMC-220
Remote Controller and a standard keyboard. Details of each are outlined as follows.
11.1 RMC-220 Function Keys
There are 10 user-defined function keys, F1 to F10, on RMC-220 Remote Controller. These
function keys are configurable on the TVS-1000A system. Each of these function keys can be
assigned of multiple functions selected from the table below:
Audio
DSK
Capture Mute
Set Position
Capture Volume
Set Preview
Input Mute
Set Rotation
Input Solo
Set Scale
Input Volume
Set Source
Output Mute
Transition Cut
Output Volume
Transition Fade
Streaming Mute
Streaming Volume
The user just needs to press the RMC-220 function key button once to execute the selected
functions according to the sequence in which the functions are selected.
To assign specific multiple functions to these 10 function keys, open the TVS-1000A configuration
window and click on "Triggers" tab. Function key tabs can be found at the top of the
configuration window. Click on the Function Key tab that you would like to customize and in the
example below, Key F1 is selected.
In general, two modes are available and they are "Simple" and "Advanced".
11.1.1 Advanced
In Advanced mode, the user is allowed to select all available functions in the above table.
Furthermore, the execution sequence of the selected functions is customizable.
External Keyboards
General Mix Effect
Delay
66
Media
Import Studio
Auto Play
Set AutoPlay
Loop Play
Set Bus A Source
Pause
Set Bus B Source
Play
Set Phase
Select
Set Speed
Stop
Output
Select Preview
Select Program
Transition Cross-Dissolve
Transition Fade to Black
Advertisement
Table of Contents
