Table of Contents
Advertisement
2.5
RMC-280 Remote Controller
The RMC-280 is a cost effective remote controller designed specifically for the TVS-2000A
Virtual Studio System. The RMC-280 interfaces with the TVS-2000A Virtual Studio System via
an RS-232 interface. The RMC-280 gives the user switcher-style control of the TVS-2000A
Virtual Studio System. There are several effects that the user can also control on the RMC-280,
such as downstream keyers (DSK) and transition effects. In addition, the T-Bar gives the user
the convenience to perform transitions between Preview (PVW) and Program (PGM).
The RMC-280 has also been equipped with 10 function keys, which provide the user with the
flexibility of manually assigning functions related to audio features, downstream keyer, delay,
media player functions and output effects to the 10 keys.
The features are summarized as follows:
• A switcher style keyboard for direct TVS-2000A operation
• Clear key definitions
• Ten user-defined function keys, F1 to F10 and each of these function keys can be:
Audio
Capture: Mute
Set Position
Capture: Volume
Set Preview
Input: Mute
Set Rotation
Input: Solo
Set Scale
Input: Volume
Set Source
Output: Mute
Transition Cut
Output: Volume
Transition
Streaming: Mute
Fade
Streaming: Volume
• Program/Preset Rows with buttons allowing the user to switch between CAM 1, CAM 2,
AUX, V/C 1, V/C 2, V/C 3, V/C 4, Media 1, Media 2, Still 1 and Still 2
• Ten custom-set phase buttons for virtual camera lens zoom in/out
• Linear and Curved buttons for respective camera movements.
• T-Bar can be operated in one way or two way mode
• TAKE button to switch between PVW and PGM views
• FTB button fades the PGM view to a black screen
• CROSS DISSOLVE button applies cross-dissolve transition effect to switching between PGM
and PVW views
• Two downstream keyers (DSK) with two corresponding knobs for assignment of DSK
sources
• CUT and AUTO TRANS buttons transition DSKs between PGM and PVW views
• STM button starts live video program streaming
• Capture function (CAP Button) records the live video program
• Still Grab function (GRAB Button) captures the instantaneous video image
• RS-232 interface for communication between RMC-280 and TVS-2000A
• 12V DC input making the unit ideal for studio applications
• Bright LED lighting
DSK
General
Media
Delay
Auto Play
Loop Play
Pause
Play
Select
Stop
12
Output
Select Preview
Studio: Load
Select Program
Studio: Select Camera
Transition Cross-
Studio: Set Bus A Source
Dissolve
Studio: Set Bus B Source
Transition Fade
Studio: Set Bus C Source
to Black
Transition Take
V/C
Advertisement
Table of Contents
