Adjustments - Agilent Technologies N5242A Service Manual

Tests and Adjustments

Adjustments

Adjustments
These adjustments are firmware-driven tests that are used to fine-tune your analyzer.
If multiple adjustments are to be performed, perform them in the order listed.
• "10 MHz Frequency Reference Adjustment" on page 3-37
• "IF Gain Adjustment" on page 3-38
• "Synthesizer Bandwidth Adjustment" on page 3-38
• "Source Adjustment" on page 3-39
• "Receiver Adjustment" on page 3-40
• "Receiver Characterization" on page 3-43
• "EE Default Adjustment" on page 3-43
• "Noise Figure Adjustment (Available Only with Option 029 Installed)" on page 3-44
These adjustments are described on the following pages.
3-36
PNA Series Microwave Network Analyzers
Service Guide N5242-90001
N5241A/42A