Table of Contents
Advertisement
PNA Series Microwave Network Analyzers
N5241A/42A
Noise Measurement Group Operation (Option 029)
The noise measurement group
block diagram of the noise measurement group. Although the 4-port configuration is
shown, the 2-port configuration is very similar. Refer to the detailed block diagrams at the
end of
Chapter 4
if necessary.
In this section the following assemblies are described:
•
A52 and A53 Test Port 1 and 2 Option 029 Switches
•
A54 Test Port 2 Option 029 Bridge
•
A55 Noise Downconverter
•
A7 Noise Receiver Board
A52 and A53 Test Port 1 and 2 Option 029 Switches
Description here.
A54 Test Port 2 Option 029 Bridge
Description here.
A55 Noise Downconverter
Description here.
A7 Noise Receiver Board
Description here.
Service Guide N5242-90001
does
something.
Figure 5-8 on page 5-28
Noise Measurement Group Operation (Option 029)
is a simplified
Theory of Operation
5-27
Advertisement
Table of Contents
Troubleshooting
