Option 219, 2-Port With Extended Power Range And Bias Tees; Option 224, 2-Port With 2Nd Source, Combiner, And Mechanical Switches; Option 400, Standard 4-Port Configuration; Option 419, 4-Port With Extended Power Range And Bias Tees - Agilent Technologies N5242A Service Manual

General Product Information PNA Series Microwave Network Analyzers
Analyzer Options Available N5241A/42A
• a reference mixer switch
• configurable test set

Option 219, 2-Port with Extended Power Range and Bias Tees

In addition to the Option 200 hardware, this 2-port analyzer contains:
• two source attenuators
• two receiver attenuators
• two bias tees
Option 224, 2-Port with 2nd Source, Combiner, and Mechanical
Switches
In addition to the Options 200 and 219 hardware, this 2-port analyzer contains:
• another internal source with front-panel outputs (SRC 2 OUT1 and SRC 2 OUT 2)
• one source combiner
• three mechanical switches

Option 400, Standard 4-Port Configuration

This is a 4-port network analyzer with an upper frequency limit of either 13.5 GHz
(N5241A) or 26.5 GHz (N5242A). This is the standard 4-port analyzer and contains:
• two internal sources
• a reference mixer switch
• configurable test set

Option 419, 4-Port with Extended Power Range and Bias Tees

In addition to the Option 400 hardware, this 4-port analyzer contains:.
• four source attenuators
• four receiver attenuators
• four bias tees

Option 423, 4-Port with Combiner, and Mechanical Switches

In addition to the Options 400 and 419 hardware, this 4-port analyzer contains:
• one source combiner
• four mechanical switches

Option 551, N-Port Calibrated Measurements

This option allows your analyzer to make calibrated measurements on any number (N) of
ports.
2-6 Service Guide N5242-90001