Analyzer Upgrades Available - Agilent Technologies N5242A Service Manual

2-port and 4-port pna-x microwave network analyzers
Hide thumbs Also See for N5242A:
Table of Contents

Advertisement

PNA Series Microwave Network Analyzers
N5241A/42A

Analyzer Upgrades Available

The options described in this chapter can be ordered as upgrades. The following table lists
the Upgrades that are available for the N5241A and N5242A analyzers. Refer to the
previous section,
"Analyzer Options Available" on page
each option.
Refer also to
Chapter 6, "Replaceable Parts"
and information on how to order them.
Table 2-1
Analyzer Upgrades Available
Add Pulsed RF Measurement Capability (Option H08)
Add Time Domain Operation (Option 010)
Add IF Inputs for Antenna and mm-Wave (Option 020)
Add Pulse Modulator to 1st Internal Source (Option 021)
Add Pulse Modulator to 2nd Internal Source (Option 022)
Add Four Internal Pulse Generators (Option 025)
Add Frequency Offset Mode (Option 080)
Add Scalar Calibrated Converter Measurements (Option 082)
Add Vector and Scalar Calibrated Converter Measurements (Option 083)
Bias Tees and Source and Receiver Attenuators for 2-Port Models
(Option 200 to 219)
Second Internal Source, Combiner, and Mechanical Switches for 2-Port Models
(Option 219 to 224)
4-Port Capability, Second Internal Source (Option 200 to 400)
4-Port Capability, Bias Tees and Source and Receiver Attenuators for additional ports,
and Second Internal Source (Option 219 to 419)
4-Port Capability, Bias Tees and Source and Receiver Attenuators for additional ports,
and Mechanical Switch (Option 224 to 423)
Add Option H85 High Power Configuration Capability (remove bias tees) to 2-Port and
4-Port Models
Add Option 029 (noise figure measurement capability) to 2-Port Models
Bias Tees and Source and Receiver Attenuators for 4-Port Models
(Option 400 to 419)
Combiner and Mechanical Switches for 4-Port Models
Option 419 to 423)
Add Option 029 (noise figure measurement capability) to 4-Port Models
N-Port Calibrated Measurements (Option 551)
Add built-in performance test software for Agilent inclusive calibration perpetual
license (Option897)
Service Guide N5242-90001
for a complete list of available upgrade kits
Upgrade
General Product Information
Analyzer Upgrades Available
2-3, for a complete description of
Order Number
N5241A/42AU-H08
N5241A/42AU-010
N5241A/42AU-020
N5241A/42AU-021
N5241A/42AU-022
N5241A/42AU-025
N5241A/42AU-080
N5241A/42AU-082
N5241A/42AU-083
N5241A/42AU-921
N5241A/42AU-922
N5241A/42AU-940
N5241A/42AU-942
N5241A/42AU-944
N5241A/42AU-H85
N5241A/42AU-924
N5241A/42AU-926
N5241A/42AU-927
N5241A/42AU-929
N5241A/42AU-551
N5241A/42AU-897
2-9

Advertisement

Table of Contents
loading

This manual is also suitable for:

N5241a

Table of Contents