Ordering Information; Assembly Replacement Sequence - Agilent Technologies N5242A Service Manual

PNA Series Microwave Network Analyzers
N5241A/42A

Ordering Information

To order a part listed in the replaceable parts lists:
• include the part number
• indicate the quantity required
• Contact Agilent Technologies for instructions on where to send the order. Refer to
"Contacting Agilent" on page
To order a part that is not listed in the replaceable parts lists:
• include the instrument model number and complete instrument serial number
• include the description and function of the part
• indicate the quantity required
• Contact Agilent Technologies for instructions on where to send the order. Refer to
"Contacting Agilent" on page

Assembly Replacement Sequence

The following steps describe how to replace an assembly in the network analyzer.
Step 1. Identify the faulty group. Begin with
with the appropriate troubleshooting chapter that identifies the faulty assembly.
Step 2. Order a replacement assembly. Refer to this chapter.
Step 3. Replace the faulty assembly and determine what adjustments are necessary.
Refer to Chapter 7, "Repair and Replacement Procedures."
Step 4. Perform the necessary adjustments. Refer to
Step 5. Perform the necessary performance tests. Refer to
Adjustments."
Service Guide N5242-90001
2-15.
2-15.
Chapter 4, "Troubleshooting."
Ordering Information
Chapter 3, "Tests and Adjustments."
Chapter 3, "Tests and
Replaceable Parts
Follow up
6-3