Table of Contents
Advertisement
Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to Figures 1–4 and the following descrip-
tions to become familiar with the basic controls
and components of this machine. Understanding
these items and how they work will help you
understand the rest of the manual and stay safe
when operating this machine.
A
Figure 1. ON/OFF paddle switch location.
A. ON/OFF Paddle Switch w/Disabling Key:
Turns motor ON and OFF. Remove yellow
key to disable switch.
-4-
manual
BEFORE
B
G
Figure 2. Main table controls, fence, and foot
pedal caster.
B. Fence: Guides workpiece as it moves across
cutterhead; determines angle of cut.
C. Fence Tilt Handle: Tilts fence throughout its
range of motion from 45° inward to 45° out-
ward (135°).
D. Infeed Table: Supports workpiece before it
reaches cutterhead. Position of infeed table
relative to cutterhead determines depth of
cut.
E. Infeed Table Adjustment Lever: Adjusts
position of infeed table (when infeed table
lock is loosened).
J.
Infeed Table Lock: Loosens to allow adjust-
ment of infeed table height or cutting depth
tightens to secure infeed table.
G. Outfeed Table: Supports workpiece after
it passes over cutterhead. For safety and
best results, outfeed table must be properly
adjusted relative to cutterhead knives/inserts
before ANY operations (refer to Page 51 for
more details).
Model G0813/G0814/G0814X (Mfd. Since 10/19)
C
D
J
E
Advertisement
Table of Contents
