Controls & Components - Grizzly T32957 Owner's Manual

Controls &
Components
Refer to the following figures and descriptions to
become familiar with the basic controls and com-
ponents of this machine. Understanding these
items and how they work will help you understand
the rest of the manual and minimize your risk of
injury when operating this machine.
B
A
G
F
Figure 1. Infeed components and controls.
A. Hold-Down/Blade Guard: Holds down
workpiece and protects user from blades
during shearing operation.
B. Table: Supports infeed side of workpiece.
C. Bevel Gauge: Secures front edge of angled
workpieces.
D. Foot Pedal: Controls cutting action of upper
blade.
E. Front Extension Arm (1 of 2): Provides
infeed support for large workpieces and
extends front work stop and bevel track.
F. Front Work Stop: Adjusts on front extension
arms and holds workpiece in place during
shearing operation.
G. Front Scale (1 of 2): Indicates distance from
cutting line; keeps workpiece square with
blades.
-4-
C
D
E
I
H
M
L
Figure 2. Outfeed components and controls.
H. Rear Work Stop Support Rod (1 of 2):
Supports work stop and has scale for
approximate positioning from 0–33".
I. Rear Work Stop Indicator: Indicates rear
work stop position on scale.
J. Micro-Adjustment Knob (1 of 2): Fine-
tunes rear work stop position.
K. Rear Work Stop Lock Knob (1 of 2):
Loosen to adjust rear work stop position;
tighten to secure.
L. Micro-Adjustment Lock Knob (1 of 2):
Loosen to fine-tune rear work stop position;
tighten to secure.
M. Rear Work Stop: Adjusts on rear work
stop support rods to measure and support
workpieces for repeatable cuts.
Figure 3. Location of blade bow.
N. Blade Bow: Adjusts to keep upper blade
straight along its length.
Model T32957 (Mfd. Since 09/21)
J
K
N