Table of Contents
Advertisement
Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to the following figures and descriptions to
become familiar with the basic controls and com-
ponents of this machine. Understanding these
items and how they work will help you understand
the rest of the manual and minimize your risk of
injury when operating this machine.
Buffing Wheel Components
A
B
Figure 1. Buffing wheel components.
A. Buffing Wheel: Spins to buff workpiece.
Can be replaced with different buffing/pol-
ishing wheels for different operations and
compounds.
B. Spindle: Secures and spins buffing wheels.
T32253 accepts wheels up to 12" in diameter
with a
⁄
" bore. T32254 accepts wheels up to
1
2
14" in diameter with a
-4-
manual
BEFORE
⁄
" bore.
5
8
Electrical Components
C
D
Figure 2. Control panel components.
C. ON/OFF Switch w/Disabling Key: Turns
motor ON when moved up; turns motor OFF
when moved down. When key is removed,
switch is disabled and machine cannot start.
D. Variable-Speed Dial: Rotates to adjust buff-
ing speed. Variable-speed dial must be turned
fully counterclockwise for motor to start.
E. Digital Readout: Displays spindle RPM.
F
Figure 3. LED work light.
F.
LED Work Light: Illuminates buffing area for
better visibility. Turns ON when machine is
turned ON and adjusts to desired position.
Model T32253/T32254 (Mfd. Since 08/20)
E
Advertisement
Table of Contents
