Replacing The Ramming Shoe - Wacker Neuson BS 50 Repair Manual

Ramming System
5.2

Replacing the Ramming Shoe

Requirements
Removal
5.2.1
5.2.2
5.2.3
5.2.4
5.2.5
5.2.6
• Torque wrench
• Lifting device capable of lifting the machine
Perform the procedure below to remove the shoe.
Support the machine with a lifting device capable of lifting the weight
of the machine. See chapter
On machines with cast iron shoes, remove the hex head screws
and that hold the shoe
b)
the lock nuts and washers
(d)
the bottom plate to the machine.
(g)
a
b
a
b
Raise the machine off the shoe. Position the machine in a secure
place.
Remove the plow bolts
Remove the plow bolts
Separate the shoe
(g)
Technical Data
to the machine. For all others, remove
(c)
that hold the ramming shoe
(e)
c
f
g
i
c
, , and .
(m) (n) (o)
and , lockwashers
(i j)
from the bottom plate
92
Rammer Repair
for weights.
(f)
d
e
m n o
wc_gr007519
, and lock nuts
(k) (l)
.
(f)
wc_tx001547gb.fm
(a
and
l
k
j
.