Swd (Smartwire-Dt Interface) - Eaton XV-102 Operating Instructions Manual

9.5.2.2
Property
Repetition rate
Status indication
Tab. 36 POW/AUX (power supply interface for SmartWire-DT)
1) If contactors and/or motor starters with a total power consumption > 3 A (DIN VDE 0641, Part 11 and IEC/EN 60898) or > 2 A
(UL 508 and CSA-22.2, No. 14) are connected, a power feeder module EU5C-SWD-PF1 or EU5C-SWD-PF2 has to be used.

SWD (SmartWire-DT interface)

Property
SmartWire-DT supply voltage U
Rated operating voltage
(internally transformed supply voltage U
Current
Short-circuit strength
Number of SmartWire-DT slaves on the
SmartWire-DT netwerk
Address setting of the SmartWire-DT slaves
Baud rate
Tab. 37 SWD (SmartWire-DT interface)
1) If SmartWire-DT slaves with a total power consumption > 0.7 A are connected, a power feeder module EU5C-SWD-PF2 has
to be used.
XV-102 Micro Panel MN04802004Z-EN—February 2013 www.eaton.com
www.comoso.com
XV-102
1 s
Yes (LEDs)
XV-102
VP
14.5 VDC ±3 % (14.0...15.0 VDC)
)
Pow
1)
Max. 0.7 A
Yes
Max. 99
Automatic
125 Kbit/s
250 Kbit/s
9 Technical data
9.5 Interfaces
71