Ethernet - Eaton XV-102 Operating Instructions Manual

5.3.5
Cable

Ethernet

Fig. 13 Ethernet interface (RJ45 socket)
LED Signal
ACT (yellow) flashes
LINK (green) lit
Tab. 11 Control LEDs of the Ethernet interface
Use shielded twisted pair cable (STP) for networking:
For device to device connection: crossover cable
For connecting to the hub/switch: 1:1 patch cable
Maximum cable length: 100 m.
CAUTION
Forces acting on the Ethernet interface
Communication can be disturbed and the connection mechanics damaged if the
Ethernet interface is exposed to severe vibration or the RJ45 plug connection is
pulled.
Protect the RJ45 connection from severe vibration.
Protect the RJ45 connection from pulling on the socket.
XV-102 Micro Panel MN04802004Z-EN—February 2013 www.eaton.com
www.comoso.com
LINK ACT
Meaning
Ethernet is active (data traffic)
Active network is connected and detected
5 Installation
5.3 Interfaces
31