6 Operation
6.2 Starting the device
6.2
6.3
54
Starting the device
1
Energize the device.
The device will boot.
2
If the device does not boot up and/or if an error message appears while starting (booting) the
device, see Chapter 7.4 Troubleshooting,
3
Complete the following steps after initial commissioning
(
Document «MN05010007Z-EN System Description Windows CE»):
3.1
Adjust the system settings of the device.
3.2
Install the required application programs.
The lifespan of the backlight can be increased by reducing the brightness (
«MN05010007Z-EN System Description Windows CE»).
Switching off the device
1
De-energize the device.
XV-102 Micro Panel MN04802004Z-EN—February 2013 www.eaton.com
www.comoso.com
60.
Document