Mounting The Device - Eaton XV-102 Operating Instructions Manual

5.4.1

Mounting the device

1 Select the mounting position of the device as described in Chapter 5.2.2 Requirements for the
mounting position, 22.
2 Prepare a mounting cutout for the device at the selected position:
Mounting cutout:
3.5" devices: 123 87 mm (±1 mm)
5.7" devices: 157 117 mm (±1 mm)
7.0" devices: 197 122 mm (±1 mm)
Material thickness at the mounting cutout 2...5 mm
123.0
+1/-1
Fig. 26 Mounting cutout for 3.5" devices
197.0
+1/-1
Fig. 28 Mounting cutout for 7.0" devices
XV-102 Micro Panel MN04802004Z-EN—February 2013 www.eaton.com
www.comoso.com
157.0
+1/-1
Fig. 27 Mounting cutout for 5.7" devices
5 Installation
5.4 Mounting
47