Operating And Indication Elements Of The Smartwire-Dt Master Interface - Eaton XV-102 Operating Instructions Manual

5 Installation
5.3 Interfaces
5.3.8.2
34

Operating and indication elements of the SmartWire-DT Master interface

Fig. 16 SmartWire-DT Master interface
Element
A POW/AUX interface Power supply interface for SmartWire-DT
(
B POW LED Lit if the SmartWire-DT netwerk is supplied with current.
C SWD LED Indicates whether the physical structure of the SmartWire-DT network
matches the target configuration. Each time the power supply is
switched on, the configurations are compared (
D Config LED Indicates whether the project configuration of the SWD master defined
in the PLC matches the target configuration of the SmartWire-DT
network stored in the device. Each time the power supply is switched
on, the configurations are compared (
E Configuration button Configuring the SmartWire-DT network.
F SWD interface
Tab. 12 Operating and indication elements of the SmartWire-DT Master interface
XV-102 Micro Panel MN04802004Z-EN—February 2013 www.eaton.com
www.comoso.com
Function
Chapter 5.3.8.3, 35)
37).
SmartWire-DT interface ( Chapter 5.3.8.4,
Chapter 5.3.8.5,
Chapter 5.3.8.5, 37).
36)