Smartwire-Dt Master; Additional Documentation For Devices With Smartwire-Dt Master Interface - Eaton XV-102 Operating Instructions Manual

5.3.8
5.3.8.1

SmartWire-DT Master

The SmartWire-DT Master interface is not electrically isolated.
CAUTION
Not electrically isolated SmartWire-DT system
The device may be damaged due to potential differences.
Provide a common star point for the earth wiring.

Additional documentation for devices with SmartWire-DT Master interface

In addition to this document, the following documents are required to build a SmartWire-DT netwerk, to
install the network at the SmartWire-DT Master interface and to operate the network.
Available from ftp://ftp.moeller.net/DOCUMENTATION/AWB_MANUALS/:
MN05006002Z-EN Manual SmartWire-DT The System
(system description, engineering, installation, commissioning and diagnostics of a SmartWire-
DT netwerk)
MN05006001Z-EN Manual SmartWire-DT Units
(surface mounting, engineering, installation, etc. of the single SmartWire-DT slaves)
Available from our home page (www.eaton-automation.com/en), «DOWNLOADS» section:
MN04802091Z-EN User Manual XSoft-CoDeSys-2: PLC programming XV100
(Use of the PLC programming tool XSoft-CoDeSys-2 and the PLC runtime system for the
XV100 device type with Windows CE)
The documents can also be downloaded from www.eaton.com (search document No. via
search field of the home page).
XV-102 Micro Panel MN04802004Z-EN—February 2013 www.eaton.com
www.comoso.com
5 Installation
5.3 Interfaces
33