Air Tube Removal And Replacement - Travis Industries Flush Wood Plus Owner's Manual

Air Tube Removal & Replacement
VIEW FROM THE FRONT
Air Channel
Air Tube Bolt
AIR TUBE REMOVAL
Note how the center of the air tube pin
inserts into a hole on the air tube.
© Travis Industries
Maintaining Your Appliance
Air Tube
Air Tube Pin
With the bolt loosened the air tube can
be slid out of the air channel.
The pin will then disengage from the air tube
(you may wish to rotate the tube slightly).
Pivot the air tube downwards and slide it out of
the air channel on the opposite side.
100-01266_000
VIEW FROM THE REAR
Air Tube Bolt
3/8" Wrench
Loosen this bolt 2 or 3
turns (do not remove).
TUBE SIZING
Front Tube = 25-7/8"
Second Tube = 25-7/8"
Third Tube = 22-5/8"
Back Tube = 19-3/8"
Air Channel
33
4150520