Air Tube Removal & Replacement - Travis Industries Large Flush Wood Insert Owner's Manual

34
Air Tube Removal & Replacement
Use penetrating oil (WD-40™ or similar) on the bolts before removing them. Let the oil soak in for
several minutes before attempting to remove the bolts.
VIEW FROM THE FRONT
Air Channel
Air Tube Bolt
AIR TUBE REMOVAL
Note how the center of the air tube pin
inserts into a hole on the air tube.
Pivot the air tube downwards and slide it out of
the air channel on the opposite side.
© Travis Industries
Maintaining Your Appliance
Air Tube
Air Tube Pin
Loosen this bolt 2 or 3
turns (do not remove).
With the bolt loosened the air tube can
be slid out of the air channel.
The pin will then disengage from the air tube
(you may wish to rotate the tube slightly).
VIEW FROM THE REAR
Air Channel
Air Tube Bolt
3/8" Wrench
TUBE SIZING
Front Tube = 27-7/8" 709mm
Middle Tube = 26" 661mm
Back Tube = 21-1/4" 540mm
100-01273 4150514