Fireplace Requirements; Fireplace Altered Tag - Travis Industries Flush Wood Plus Owner's Manual

8 Fireplace Insert Installation

Fireplace Requirements

Figure 2 shows the minimum size requirements for the type of fireplace used.
j
i
a
g

Fireplace Altered Tag

Attach the "This fireplace has been altered..." plate to the fireplace (use two screws or other suitable
method). You may wish to place it in a location where it will be covered by the surround panels.
© Travis Industries
h
b
d
c
e
f
Figure 2
(for qualified installers only)
Minimum
Fireplace Size
a Height (front)
b Height (rear)
c Width (front)
d Width (rear)
e Depth ***
f Hearth Depth
(includes insert
depth on hearth
plus required
hearth extension)
g Hearth Width
h Facing Width
i Facing Height
j Mantel Height
* Includes 2"(51mm) for power cord installation.
** 1" (26mm) Clearance to fireplace walls is required for ZC Fireplaces.
*** Add 1.25" (32mm) when using one-piece panel (FW+ Rectangle Only)
100-01266_000
Masonry Z.C. (Metal)
Fireplace Fireplace
21.5" 21.5"
547mm 547mm
19.75" 19.75"
502mm 502mm
30.875" * 30.875" **
(785mm) (785mm)
18.875" 20.875" **
(480mm) (531mm)
17.75" 18.75" **
(451mm) (477mm)
17.25" 17.25"
439mm (US) 439mm (US)
- - - - - - - - - - - - - - - - - - - - - - - -
19.25" 19.25"
489mm (Canada) 489mm (Canada)
44.875" 44.875"
1140mm 1140mm
46.875" 46.875"
1191mm 1191mm
39" 39"
991mm 991mm
41.5" 41.5"
1055mm 1055mm
4150520