Firebox Parts; Baffle Removal And Replacement - Travis Industries Flush Wood Plus Owner's Manual

32

Firebox Parts

Baffle Parts
ID # Description
1 Sec. Air Tubes w Pins (all 4) L-24
3 Baffle Front
5 Bypass Plate
7 Damper Yoke
Baffle Removal
1 Remove the face to prevent damage. Remove the door (lift off hinges).
2 Remove the front two air tubes (see "Air Tube Removal & Replacement" on the following page).
3 Remove front row of bricks.
4 Unscrew the damper rod extension from damper yoke and slide it forward to remove (you may
need to use pliers to unscrew the rod).
5 Lift the damper yoke up to disengage it from the damper plate. The yoke may be left in place or
unscrewed and removed if needed.
6 Remove the bypass plate and damper assembly by pulling forward and leaning the front edge
down.
7 Remove the four rear bricks.
8 Remove baffle front and baffle plate (rotate it forward).
© Travis Industries
Maintaining Your Appliance
3
Qty Part #
1 98900243
1 250-02187
1 221-12120
1 250-02189
100-01266_000
7
5
ID # Description
2 Air Tube Pin (w Screw)
4 Baffle Plate
6 Bypass Slider
6
4
1
2
Qty Part #
4 250-02186
1 250-02188
1 221-12122
1
4150520