Removing The Starter Clutch; Checking The Starter Clutch - Yamaha FJR1300N 2001 Service Manual

GENERATOR AND STARTER CLUTCH

REMOVING THE STARTER CLUTCH

1. Remove:
• starter clutch bolts 1
• starter clutch
NOTE:
@
While holding the generator rotor with the
sheave holder, remove the starter clutch bolts.
Sheave holder
90890-01701
EAS00351

CHECKING THE STARTER CLUTCH

1. Check:
• starter clutch rollers 1
Damage/wear → Replace.
2. Check:
• starter clutch idle gear 1
• starter clutch gear 2
Burrs/chips/roughness/wear → Replace the
defective part(s).
3. Check:
• starter clutch gear's contacting surfaces a
Damage/pitting/wear → Replace the starter
clutch gear.
4. Check:
• starter clutch operation
a. Install the starter clutch gear 1 onto the
starter clutch 2 and hold the starter clutch.
5 - 38
ENG