EAS30867
REMOVING THE MAGNETO
1. Remove:
• Magneto rotor nut "1"
• Washer
TIP
• While holding the magneto rotor "2" with the mag-
neto holder "3", loosen the magneto rotor nut.
• Do not allow the magneto holder to touch the
projection on the magneto rotor.
Magneto holder
YSST-701
(90890-01701)
(90890-01481)
2. Remove:
• Magneto rotor "1"
(with the magneto puller "2" and magneto
holder "3")
• Woodruff key
ECA13880
To protect the end of the crankshaft, place a
bush "4" between the magneto puller set
center bolt and the crankshaft.
TIP
Make sure the magneto puller is centered over
the magneto rotor.
MAGNETO AND STARTER CLUTCH
Magneto puller
YSST-702
(90890-04141)
Bush
YSST-893
EAS30868
REMOVING THE STARTER CLUTCH
1. Remove:
• Starter clutch bolts "1"
TIP
• While holding the magneto rotor "2" with the
magneto holder "3", remove the starter clutch
bolts.
• Do not allow the magneto holder to touch the
projection on the magneto rotor.
Magneto holder
YSST-701
(90890-01701)
(90890-01481)
EAS30869
CHECKING THE STARTER CLUTCH
1. Check:
• Starter clutch rollers "1"
• Starter clutch spring caps "2"
• Starter clutch springs "3"
Damage/wear → Replace the starter clutch
assembly.
5-34
ENG
3
2
1