Yamaha FJR1300N 2001 Service Manual page 534

EAS00759
4. Starting circuit cut-off relay
• Disconnect the starting circuit cut-off relay
from the wire harness.
• Connect the pocket tester (Ω × 1) and bat-
tery (12 V) to the starting circuit cut-off relay
terminals as shown.
Battery positive terminal → red/black 1
Battery negative terminal →
Tester positive probe → blue/white 3
Tester negative probe → black 4
Lg R/B L/W
L/G L/Y Sb B/Y B
• Does the starting circuit cut-off relay have
continuity between blue/white and black?
YES
EAS00760
5. Starting circuit cut-off relay (diode)
• Disconnect the starting circuit cut-off relay
from the wire harness.
• Connect the pocket tester (Ω × 1) to the
starting circuit cut-off relay terminals as
shown.
• Measure the starting circuit cut-off relay for
continuity as follows.
ELECTRIC STARTING SYSTEM
black/yellow 2
+
NO
Replace the starting
circuit cut-off relay.
Tester positive probe →
Tester negative probe →
Tester positive probe →
Tester negative probe →
Tester positive probe →
Tester negative probe →
Tester positive probe →
Tester negative probe →
Tester positive probe →
Tester negative probe →
Tester positive probe →
Tester negative probe →
Tester positive probe →
Tester negative probe →
Tester positive probe →
Tester negative probe →
8 - 18
ELEC
sky blue 1
light green 2
sky blue 1
black/yellow 3
sky blue 1
blue/yellow 4
blue/green 5
blue/yellow 4
light green 2
sky blue 1
black/yellow 3
sky blue 1
blue/yellow 4
sky blue 1
blue/yellow 4
blue/green 5
Lg
R/B L/W
L/G L/Y Sb B/Y B
– +
Continu-
ity
No conti-
nuity