Checking The Middle Driven Shaft Assembly; Assembling The Middle Drive Shaft Assembly; Assembling The Middle Driven Shaft Assembly - Yamaha FJR1300N 2001 Service Manual

MIDDLE GEAR
EAS00439
CHECKING THE MIDDLE DRIVEN SHAFT
ASSEMBLY
1. Check:
• middle driven gear
Galling/pitting/wear → Replace the middle
driven shaft assembly.
2. Check:
• bearings
Damage/pitting → Replace the middle drive
shaft bearing housing assembly.
3. Check:
• O-ring
• oil seal
Damage → Replace the defective part(s).
EAS00440
ASSEMBLING THE MIDDLE DRIVE SHAFT
ASSEMBLY
1. Install:
• spring retainers 1
NOTE:
@
While compressing the spring with the damper
spring compressor 2, install the spring retain-
ers.
Damper spring compressor
90890-04090
EAS00442
ASSEMBLING THE MIDDLE DRIVEN SHAFT
ASSEMBLY
1. Tighten:
• bearing retainer 1
(with the bearing retainer wrench 2)
Bearing retainer wrench
90890-04140
5 - 72
ENG
110 Nm (11.0 m · kg)