VALVES AND VALVE SPRINGS
2. Measure:
b Installed length
3. Measure:
EAS00242
CHECKING THE VALVE LIFTERS
The following procedure applies to all of the
valve lifters.
1. Check:
5 - 31
• compressed valve spring force a
Out of specification → Replace the valve
spring.
Compressed valve spring force
(installed)
13.9 ~ 16.1 kg at 33 mm
• valve spring tilt a
Out of specification → Replace the valve
spring.
Maximum valve spring tilt
1.7 mm
• valve lifter
Damage/scratches → Replace the valve lift-
ers and cylinder head.
ENG