Assembling The Water Pump - Yamaha FJR1300N 2001 Service Manual

WATER PUMP
EAS00475

ASSEMBLING THE WATER PUMP

1. Install:
• oil seal 1
(into the water pump housing 2)
NOTE:
@
• Before installing the oil seal, apply tap water
or coolant onto its out surface.
• Install the oil seal with a socket that matches
its outside diameter.
2. Install:
• water pump seal 1
CAUTION:
@
Never lubricate the water pump seal sur-
face with oil or grease.
NOTE:
@
• Install the water pump seal with the special
tools.
• Before installing the water pump seal, apply
Yamaha bond No.1215 2 to the water pump
housing 3.
Mechanical seal installer
90890-04078 4
Middle driven shaft bearing driver
90890-04058 5
Yamaha bond #1215
90890-85505
È Push down.
3. Install:
• rubber damper 1
• rubber damper holder 2
NOTE:
@
Before installing the rubber damper, apply tap
water or coolant onto its outer surface.
6 - 16
COOL
New
New
New
New