Removing And Installing The Ring Gear Bearings - Yamaha FJR1300N 2001 Service Manual

SHAFT DRIVE
4. Remove:
• bearing retainer
(with the bearing retainer wrench 1)
Bearing retainer wrench
90890-04050
CAUTION:
@
The bearing retainer has left-hand threads.
To loosen the bearing retainer, turn it
clockwise.
@
5. Remove:
• final drive pinion gear
WARNING
@
Always use new bearings.
@
CAUTION:
@
The final drive pinion gear should only be
removed if ring gear replacement is neces-
sary.
@
NOTE:
@
Lightly tap on the end of the final drive pinion
gear with a soft hammer.
@
EAS00725
REMOVING AND INSTALLING THE RING
GEAR BEARINGS
1. Remove:
• collar 1
• oil seal 2
• bearing 3
(with an suitable press tool 4 and an
appropriate support for the final drive hous-
ing)
2. Check:
• bearing
Damage → Replace.
4 - 105
CHAS