Autoposition - Oce 9300 User Manual

Autoposition

This option ignores the origin contained in the print file and automatically
shifts the print data to the lower right-hand corner of the media. If necessary,
prints are rotated 90 ° to make better use of the available media.
The autoposition feature helps eliminate the need to clip prints and reduces
media waste.
[24] Autoposition to save media
Selecting autoposition
Press 'Program' to enter the main menu.
1
Select the 'C
2
Press 'next/select' to enter the 'C
3
Select the '
4
Press 'next/select' to enter the '
5
Select the '
6
Press 'next/select' to enter the '
7
Select the '
8
Press 'next/select' to enter the '
9
Select the '
10
Press 'next/select' to select the required setting.
11
Press 'Program' to exit the main menu.
12
De-selecting the media saver
Use the above procedure and select media saver OFF.
1
76 Océ 9300 User Manual
' item using the
ONFIGURATION
' item using the
PLOT MANAGER
' item using the
MEDIA SAVER
/ ' item using the
M S MODE
' item using the
AUTO POSITION
or
' menu.
ONFIGURATION
or
' menu.
PLOT MANAGER
or button.
' menu.
MEDIA SAVER
or button.
/ ' menu.
M S MODE
or
button.
button.
button.