Oce 9300 User Manual page 28

Remove the roll holder from the drawer (see figure 6 on page 28)
2
[6] Removing the roll holder from the drawer
While pressing the knob, remove the empty core from the roll holder (see
3
figure 7).
Slide the roll holder into the new roll of material while pressing the knob (see
4
figure 7).
Make sure that the knob is to the right, and that paper appears as shown in
figure 7.
[7] Pressing the knob
While pressing the knob, align the roll with the appropriate lines on the roll
5
holder. This line must be completely visible.
28 Océ 9300 User Manual