HWC_GSG_RouterConfiguration.fm
Routing configuration
Configuring the OSPF routing
56
5.2.1 Enabling OSPF globally on the Summit WM
Switch
To enable the OSPF globally on the Summit WM Switch:
1. From the main menu, click Summit Switch Configuration. The Summit
Switch Configuration screen is displayed.
2. In the left pane, click Routing Protocols. The Routing Protocols screen is
displayed.
3. Click the OSPF tab.
4. From the OSPF Status drop-down list, click ON to enable OSPF.
5. In the Router ID text box, type the IP address of the Summit WM Switch.
The router ID must be unique across the OSPF area.
If the Router ID text box is left blank, the IP address of one of the Summit WM
Switch's interfaces will be picked as the router ID.
6. In the Area ID text box, type the area.
The main area in OSPF depends upon your network configuration. You must
find out the main area from your network administrator.
7. In the Area Type drop-down list, click one of the following:
120385-00 Rev 01, March 2007
Summit WM, Getting Started Guide